Cisco Nexus 7000 Series Configuration Manual page 226

Enabling SNMP Notifications
Command
snmp-server enable traps entity [entity_fan_status_change]
[entity_mib_change] [entity_module_inserted]
[entity_module_removed] [entity_module_status_change]
[entity_power_out_change] [entity_power_status_change]
[entity_unrecognised_module]
snmp-server enable traps feature-control [FeatureOpStatusChange]
snmp-server enable traps hsrp [state-change]
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
198
Configuring SNMP
Purpose
Enables ENTITY-MIB SNMP
notifications. Optionally, enables
the following specific notifications:
• entity_fan_status_change—Enables
entity fan status-change
notifications.
• entity_mib_change—Enables
entity MIB change
notifications.
• entity_module_inserted—Enables
entity module inserted
notifications.
• entity_module_removed—Enables
entity module removed
notifications.
• entity_module_status_change—Enables
entity module status-change
notifications.
• entity_power_out_change—Enables
entity power-out change
notifications.
• entity_power_status_change—Enables
entity power status-change
notifications.
• entity_unrecognised_module—Enables
entity unrecognized module
notifications.
Enables feature-control SNMP
notifications. Optionally, enables
the following specific notifications:
• FeatureOpStatusChange—Enables
feature operation
status-change notifications.
Enables CISCO-HSRP-MIB
SNMP notifications. Optionally,
enables the following specific
notifications:
• state-change—Enables
HSRP state-change
notifications.