Configuring Online Diagnostics
Command
diagnostic clear result module [slot | all] test {test-id
| all}
Simulating Diagnostic Results
You can simulate diagnostic test results.
Use the following command in any mode to simulate a diagnostic test result or clear the simulated test results:
Command
diagnostic test simulation module slot test test-id
{fail | random-fail | success} [port number | all]
diagnostic test simulation module slot test test-id
clear
Verifying the Online Diagnostics Configuration
To display online diagnostics configuration information, perform one of the following tasks:
Command
show diagnostic bootup level
show diagnostic content module {slot | all}
show diagnostic description module slot test [test-name | all]
Purpose
Clears the test result for the specified test.
The valid ranges are as follows:
• slot—The range is from 1 to 10.
• test-id—The range is from 1 to 14.
Purpose
Simulates the test result for the specified test.
The valid ranges are as follows:
• slot—The range is from 1 to 10.
• test-id—The range is from 1 to 14.
• port number—The range is from 1 to 48.
Clears the simulated results for the specified test.
The valid ranges are as follows:
• slot—The range is from 1 to 10.
• test-id—The range is from 1 to 14.
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
Simulating Diagnostic Results
Purpose
Displays information about bootup
diagnostics.
Displays information about
diagnostic test content for a
module.
Displays the diagnostic description.
235