Configuring The Call Home Service For Cisco Smart Software Manager On-Prem - Cisco Catalyst 9500 Manual

Configuring Smart Licensing
Step 18
Step 19

Configuring the Call Home Service for Cisco Smart Software Manager On-Prem

For information about Cisco Smart Software Manager On-Prem (formerly known as Cisco Smart Software
Manager satellite), see https://www.cisco.com/c/en/us/buy/smart-accounts/software-manager-satellite.html.
To configure the Call Home service for the Cisco Smart Software Manager On-Prem (formerly known as
Cisco Smart Software Manager satellite), perform this procedure:
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Command or Action
Example:
Device(config)# ip http client
proxy-server 198.51.100.10 port 3128
exit
Example:
Device(config)# exit
copy running-config startup-config
Example:
Device# copy running-config
startup-config
Command or Action
enable
Example:
Device> enable
configure terminal
Example:
Device# configure terminal
call-home
Example:
Device(config)# call-home
profile CiscoTAC-1
Example:
Device(config-call-home)# profile
CiscoTAC-1
no destination address http url
Example:
Device(config-call-home-profile)# no
destination address http
h t t p s : / / t o o l s . c i s c o . c o m / i t s / s e r v i c e / o d d c e / s e r v i c e s / D D C E S e r v i c e
System Management Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9500 Switches)
Configuring the Call Home Service for Cisco Smart Software Manager On-Prem
Purpose
Exits global configuration mode and returns
to privileged EXEC mode.
(Optional) Saves your entries in the
configuration file.
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
Enters global configuration mode.
Enters Call Home configuration mode.
By default, the CiscoTAC-1 profile is inactive.
To use this profile with the Call Home service,
you must enable the profile.
Disable the default destination address.
103