Enabling Cfs Distribution For Ntp - Cisco Nexus 7000 Series Configuration Manual

Enabling CFS Distribution for NTP

Procedure
Step 1
Step 2
Step 3
Step 4
Enabling CFS Distribution for NTP
You can enable CFS distribution for NTP in order to distribute the NTP configuration to other CFS-enabled
devices.
Before You Begin
Make sure that you have enabled CFS distribution for the device.
Procedure
Step 1
Step 2
Step 3
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
62
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
[no] ntp logging
Example:
switch(config)# ntp logging
show ntp logging-status
Example:
switch(config)# show ntp logging-status
copy running-config startup-config
Example:
switch(config)# copy running-config
startup-config
Command or Action
switch# configure terminal
switch(config)# [no] ntp distribute
switch(config)# show ntp status
Purpose
Enters global configuration mode.
Enables or disables system logs to be generated
with significant NTP events. NTP logging is
disabled by default.
(Optional)
Displays the NTP logging configuration status.
(Optional)
Copies the running configuration to the startup
configuration.
Purpose
Enters global configuration mode.
Enables or disables the device to receive NTP
configuration updates that are distributed through CFS.
(Optional)
Displays the NTP CFS distribution status.
Configuring NTP