Virtualization Support; Licensing Requirements For The Scheduler; Prerequisites For The Scheduler; Guidelines And Limitations For The Scheduler - Cisco Nexus 7000 Series Configuration Manual
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
Configuring the Scheduler
Virtualization Support
Jobs are created in the virtual device context (VDC) that you are logged into. By default, Cisco NX-OS places
you in the default VDC. For more information, see the Cisco Nexus 7000 Series NX-OS Virtual Device Context
Configuration Guide.
Licensing Requirements for the Scheduler
Product
Cisco
NX-OS
Prerequisites for the Scheduler
The scheduler has the following prerequisites:
• You must enable any conditional features before you can configure those features in a job.
• You must have a valid license installed for any licensed features that you want to configure in the job.
• You must have network-admin user privileges to configure a scheduled job.
Guidelines and Limitations for the Scheduler
The scheduler has the following configuration guidelines and limitations:
• The scheduler can fail if it encounters one of the following while performing a job:
• Verify that you have configured the time. The scheduler does not apply a default timetable. If you create
• While defining a job, verify that no interactive or disruptive commands (for example, copy bootflash:
Default Settings for the Scheduler
This table lists the scheduler default settings.
License Requirement
The scheduler requires no license. Any feature not included in a license package is bundled
with the nx-os image and is provided at no extra charge to you. For a complete explanation
of the Cisco NX-OS licensing scheme, see the Cisco NX-OS Licensing Guide.
◦ If the license has expired for a feature at the time the job for that feature is scheduled.
◦ If a feature is disabled at the time when a job for that feature is scheduled.
◦ If you have removed a module from a slot and a job for that slot is scheduled.
a schedule and assign jobs and do not configure the time, the job is not started.
file ftp: URI, write erase, and other similar commands) are specified because the job is started and
conducted noninteractively.
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
Virtualization Support
165
Advertisement
Table of Contents
