Cisco Nexus 7000 Series Configuration Manual page 254

Runtime or Health Monitoring Diagnostics
Table 28: Runtime Diagnostic Tests for Supervisors
Test Name
ASICRegisterCheck
NVRam
RealTimeClock
PrimaryBootROM
SecondaryBootROM
CompactFlash
ExternalCompactFlash
PwrMgmtBus
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
226
Description Default Interval
Checks read/write 20 sec
access to scratch
registers for the
ASICs on a
module.
Verifies the sanity 5 min
of the NVRAM
blocks on a
supervisor.
Verifies that the 5 min
real-time clock on
the supervisor is
ticking.
Verifies the 30 min
integrity of the
primary boot
device on a
module.
Verifies the 30 min
integrity of the
secondary boot
device on a
module.
Verifies access to 30 min
the internal
compact flash
devices.
Verifies access to 30 min
the external
compact flash
devices.
Verifies the 30 sec
standby power
management
control bus.
Configuring Online Diagnostics
Supported Supervisors Unsupported
Supervisors
Sup1, Sup2, and Sup2E —
Sup1, Sup2, and Sup2E —
Sup1, Sup2, and Sup2E —
Sup1, Sup2, and Sup2E —
Sup1, Sup2, and Sup2E —
Sup1, Sup2, and Sup2E —
Sup1, Sup2, and Sup2E —
Sup1, Sup2, and Sup2E —