Cisco Nexus 7000 Series Configuration Manual page 145

Configuring Smart Call Home
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Command or Action
email-contact email-address
Example:
switch(config-callhome)#
email-contact admin@Mycompany.com
phone-contact
international-phone-number
Example:
switch(config-callhome)#
phone-contact +1-800-123-4567
streetaddress address
Example:
switch(config-callhome)#
streetaddress 123 Anystreet st.
Anytown,AnyWhere
contract-id contract-number
Example:
switch(config-callhome)#
contract-id Contract5678
customer-id customer-number
Example:
switch(config-callhome)#
customer-id Customer123456
site-id site-number
Example:
switch(config-callhome)# site-id
Site1
switch-priority number
Example:
switch(config-callhome)#
switch-priority 3
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
Configuring Contact Information
Purpose
Configures the email address for the person primarily
responsible for the device.
The email-address can be up to 255 alphanumeric
characters in email address format.
You can use any valid email address. The
Note
address cannot contain spaces.
Configures the phone number in international phone
number format for the person primarily responsible for
the device. The international-phone-number can be up
to 17 alphanumeric characters and must be in
international phone number format.
The phone number cannot contain spaces. Use
Note
the plus (+) prefix before the number.
Configures the street address as an alphanumeric string
with white spaces for the person primarily responsible
for the device.
The address can be up to 255 alphanumeric characters.
Spaces are accepted.
(Optional)
Configures the contract number for this device from the
service agreement.
The contract-number can be up to 255 alphanumeric
characters in free format.
(Optional)
Configures the customer number for this device from
the service agreement.
The customer-number can be up to 255 alphanumeric
characters in free format.
(Optional)
Configures the site number for this device.
The site-number can be up to 255 alphanumeric
characters in free format.
(Optional)
Configures the switch priority for this device.
The range is from 0 to 7, with 0 being the highest priority
and 7 the lowest. The default is 7.
Switch priority is used by the operations
Note
personnel or TAC support personnel to decide
which Call Home message should be responded
to first. You can prioritize Call Home alerts of
the same severity from each switch.
117