Clearing A Locked Session - Cisco Nexus 7000 Series Configuration Manual

Configuring CFS
Step 7
switch# configure terminal
switch(config)# snmp-server contact personname@companyname.com
switch(config)# callhome
switch(config-callhome)# email-contact admin@Mycompany.com
switch(config-callhome)# phone-contact +1-800-123-4567
switch(config-callhome)# street-address 123 Anystreet st. Anytown,AnyWhere
switch(config-callhome)# show callhome status
Distribution : Enabled
switch(config-callhome)# commit
switch(config-callhome)# copy running-config startup-config

Clearing a Locked Session

You can clear a lock held by an application from any device in the fabric.
When you clear a lock in the fabric, any pending configurations in any device in the fabric are discarded.
Caution
Before You Begin
You must have administrator permissions to release a lock.
Procedure
Step 1
Step 2
Step 3
switch# show ntp status
Distribution : Enabled
Last operational state: Fabric Locked
switch# clear ntp session
switch# show ntp status
Distribution : Enabled
Last operational state: No session
Command or Action
switch(config-callhome)# copy
running-config startup-config
Command or Action
switch# show application-name status
switch# clear application-name session
switch# show application-name status
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
Purpose
(Optional)
Saves the change persistently through reboots and restarts
by copying the running configuration to the startup
configuration.
Purpose
(Optional)
Shows the current application state.
Clears the application configuration session and
releases the lock on the fabric. All pending changes
are discarded.
(Optional)
Shows the current application state.
Clearing a Locked Session
39