Cisco Nexus 7000 Series Configuration Manual page 419

Hide thumbs Also See for Nexus 7000 Series:
Table of Contents

Advertisement

Configuring NetFlow
NetFlow
NetFlow
NetFlow
NetFlow
NetFlow
NetFlow
NetFlow
NetFlow
Bridged NetFlow
NetFlow verification
Layer 2 NetFlow
Rollback during NetFlow
6.2(2)
6.2(2)
6.2(2)
6.1(2)
6.1(2)
6.0(1)
6.0(1)
5.2(1)
5.1(1)
5.0(2)
4.2(1)
4.1(3)
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
Feature History for NetFlow
Added support for ingress NetFlow
sampling and DHCPrelay to be
configured on the same interface.
Added NAM support for NetFlow data
sources.
Added support for full NetFlow and
sampled NetFlow on the Cisco
NetFlow Generation Appliance (NGA).
Added support for sampled NetFlow
on F2 Series and F2eSeries modules.
Added the flow timeout seconds
command for F2 Series and F2e Series
modules.
NetFlow is not supported on F2 Series
modules.
Added support for the collect routing
forwarding-status command to trigger
the collection of flows denied by ACL
entries.
NetFlow is supported on switch virtual
interfaces (SVIs) for F1 Series ports.
VLAN configuration mode, which
enables you to configure VLANs
independently of their creation, is
supported when configuring bridged
NetFlow on a VLAN.
You can specify the NetFlow instance
for which you want to display NetFlow
IPv4 flows and NetFlow table
utilization.
You can define Layer 2 keys in flexible
NetFlow records that you can use to
capture flows in Layer 2 interfaces.
Rollback fails for NetFlow if, during
rollback, you try to modify a record
that is programmed in the hardware.
391

Advertisement

Table of Contents
loading

Table of Contents