Cisco Nexus 7000 Series Configuration Manual page 220
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
Enabling SNMP Notifications
The snmp-server enable traps command enables both traps and informs, depending on the configured
Note
notification host receivers.
The following table lists the commands that enable the notifications for Cisco NX-OS MIBs.
Table 22: Enabling SNMP Notifications
MIB
All notifications
CISCO-AAA-SERVER-MIB
CISCO-BGP4-MIB
CISCO-BGP-MIBv2
CISCO-STP-BRIDGE-MIB
CISCO-CALLHOME-MIB
CISCO-CFS-MIB
CISCO-CONFIG-MAN-MIB
CISCO-EIGRP-MIB
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
192
Configuring SNMP
Related Commands
snmp-server enable traps
snmp-server enable traps aaa
snmp-server enable traps aaa
server-state-change
snmp-server enable traps bgp
snmp-server enable traps bgp
cbgp2
snmp-server enable traps bridge
snmp-server enable traps bridge
newroot
snmp-server enable traps bridge
topologychange
snmp-server enable traps
callhome
snmp-server enable traps
callhome event-notify
snmp-server enable traps
callhome smtp-send-fail
snmp-server enable traps cfs
snmp-server enable traps cfs
merge-failure
snmp-server enable traps cfs
state-change-notif
snmp-server enable traps config
snmp-server enable traps config
ccmCLIRunningConfigChanged
snmp-server enable traps eigrp
[tag]
Advertisement
Table of Contents
