Enabling Cfs To Distribute User Role Configurations; Specifying A Cfs Distribution Mode - Cisco Nexus 7000 Series Configuration Manual

Configuring CFS

Enabling CFS to Distribute User Role Configurations

You can enable CFS to distribute user role configurations to all Cisco NX-OS devices in the network.
Procedure
Step 1
Step 2
Step 3
Step 4
switch# configure terminal
switch(config)# role distribute
switch(config)# show role status
Distribution : Enabled
switch(config)# copy running-config startup-config

Specifying a CFS Distribution Mode

You can specify and enable an Ethernet or IPv4 CFS distribution mode.
Procedure
Step 1
Step 2
Step 3
Step 4
Command or Action
switch# configure terminal
switch(config)# role distribute
switch(config)# show application-name
status
switch(config)# copy running-config
startup config
Command or Action
switch# configure terminal
switch(config)# cfs {eth | ipv4}
distribute
switch(config)# show cfs status
switch(config)# copy running-config
startup config
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
Specifying a CFS Distribution Mode
Purpose
Enters global configuration mode.
Enables CFS to distribute user role configurations.
(Optional)
For the specified application, displays the CFS
distribution status.
(Optional)
Saves the change persistently through reboots and
restarts by copying the running configuration to the
startup configuration.
Purpose
Enters global configuration mode.
Globally enables CFS distribution over Ethernet or
IPv4 for all applications on the device.
(Optional)
Shows the current state of CFS, including the
distribution mode.
(Optional)
Saves the change persistently through reboots and
restarts by copying the running configuration to the
startup configuration.
33