Cisco Nexus 7000 Series Nx-Os System Management Configuration Guide - Cisco Nexus 7000 Series Configuration Manual

New and Changed Information
Feature
NTP access groups
Online diagnostics
(GOLD)
Online diagnostics
(GOLD)
Online diagnostics
(GOLD)
PTP
SPAN
SPAN
System message logging
Online diagnostics
(GOLD)
Bridged NetFlow
DCBXP

Cisco Nexus 7000 Series NX-OS System Management Configuration Guide

8
Description
Added the serve, serve-only, and
query-only access group options to
control access to additional NTP
services.
Added the serve, serve-only, and
query-only access group options to
control access to additional NTP
services.
Enabled the SpineControlBus test on the
standby supervisor.
Deprecated the SnakeLoopback test on
F1 Series modules.
Added support for the Precision Time
Protocol (PTP).
Added SPAN source support for Cisco
Nexus 2000 Series Fabric Extender
interfaces.
Added the ability to configure MTU
truncation, the source rate limit, and the
multicast best effort mode for each
SPAN session.
Added the ability to add the description
for physical Ethernet interfaces and
subinterfaces in the system message log.
Added support for the SnakeLoopback
test on F1 Series modules.
Added support for VLAN configuration
mode, which enables you to configure
VLANs independently of their creation,
when configuring bridged NetFlow on
a VLAN.
This link layer protocol is used to
announce, exchange, and negotiate node
parameters between peers.
New and Changed Information
Changed in Where Documented
Release
5.2(1) Chapter 4, "Configuring
NTP"
5.2(1) Chapter 14,
"Configuring Online
Diagnostics"
5.2(1) Chapter 14,
"Configuring Online
Diagnostics"
5.2(1) Chapter 14,
"Configuring Online
Diagnostics"
5.2(1) Chapter 5, "Configuring
PTP"
5.2(1) Chapter 17,
"Configuring SPAN"
5.2(1) Chapter 17,
"Configuring SPAN"
5.2(1) Chapter 7, "Configuring
System Message
Logging"
5.1(2) Chapter 14,
"Configuring Online
Diagnostics"
5.1(1) Chapter 20,
"Configuring NetFlow"
5.1(1) Chapter 19,
"Configuring LLDP"