Configuring Cfs Distribution; Enabling Cfs Distribution For Applications; Enabling Cfs To Distribute Smart Call Home Configurations; Enabling Cfs To Distribute Device Alias Configurations - Cisco Nexus 7000 Series Configuration Manual

Configuring CFS

Configuring CFS Distribution

Enabling CFS Distribution for Applications

Enabling CFS to Distribute Smart Call Home Configurations

You can enable CFS to distribute Call Home configurations to all Cisco NX-OS devices in the network. The
entire Call Home configuration is distributed except the device priority and the sysContact names.
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
switch# configure terminal
switch(config)# callhome
switch(config-callhome)# distribute
switch(config-callhome)# show callhome status
Distribution : Enabled
switch(config-callhome)# copy running-config startup-config

Enabling CFS to Distribute Device Alias Configurations

You can enable CFS to distribute device alias configurations in order to consistently administer and maintain
the device alias database across all Cisco NX-OS devices in the fabric.
Before You Begin
Make sure that you are in the storage VDC. To change to the storage VDC, use the switchto vdc fcoe command.
Command or Action
switch# configure terminal
switch(config)# callhome
switch(config-callhome)# distribute
switch(config-callhome)# show
application-name status
switch(config-callhome)# copy
running-config startup-config
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
Configuring CFS Distribution
Purpose
Enters global configuration mode.
Enters Call Home configuration mode.
Enables CFS to distribute Smart Call Home
configuration updates.
(Optional)
For the specified application, displays the CFS
distribution status.
(Optional)
Saves the change persistently through reboots and
restarts by copying the running configuration to the
startup configuration.
25