Cisco Nexus 7000 Series Configuration Manual page 137

Configuring Smart Call Home
custom destination profile. The device sends Smart Call Home alerts to email destinations in a destination
profile only if that Smart Call Home alert belongs to one of the alert groups associated with that destination
profile and if the alert has a Smart Call Home message severity at or above the message severity set in the
destination profile.
The following table lists the supported alert groups and the default CLI command output included in Smart
Call Home messages generated for the alert group.
Alert Group
Cisco-TAC
Configuration
Diagnostic
EEM
Environmental
Description
All critical alerts from the other
alert groups destined for Smart Call
Home.
Periodic events related to
configuration.
Events generated by diagnostics.
Events generated by EEM.
Events related to power, fan, and
environment-sensing elements such
as temperature alarms.
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
Smart Call Home Alert Groups
Executed Commands
Execute commands based on the
alert group that originates the alert.
show module
show version
show diagnostic result module all
detail
show diagnostic result module
number detail
show hardware
show logging last 200
show module
show sprom all
show tech-support gold
show tech-support ha
show tech-support platform
show version
show diagnostic result module all
detail
show diagnostic result module
number detail
show module
show tech-support gold
show tech-support ha
show tech-support platform
show environment
show logging last 200
show module
show version
109