Verification Examples For Netflow Copp Interface Support - Cisco Nexus 7000 Series Configuration Manual

Configuring NetFlow
flow monitor foo
record rr
exporter ee
interface Ethernet2/45
ip flow monitor foo input
ip address 10.20.1.1/24
no shutdown
This example shows a NetFlow exporter configuration for IPv4 from the Cisco Nexus 7000 Series switch to
NAM:
flow exporter pw
destination 172.20.101.87 use-vrf management
transport udp 3000
source mgmt0
version 9
flow record pw
match ipv4 source address
match ipv4 destination address
match ip protocol
match ip tos
match transport source-port
match transport destination-port
collect counter bytes long
collect counter packets long
collect timestamp sys-uptime first
collect timestamp sys-uptime last
collect ip version
flow monitor pw
record pw
exporter pw
interface Ethernet2/9
ip flow monitor pw input
ip flow monitor pw output

Verification Examples for NetFlow CoPP Interface Support

Sample Output for the show hardware flow ip Command
switch(config-if)# show hardware flow ip
D - Direction; L4 Info - Protocol:Source Port:Destination Port
IF - Interface: (Eth)ernet, (S)vi, (V)lan, (P)ortchannel, (T)unnel
TCP Flags: Ack, Flush, Push, Reset, Syn, Urgent
D IF
--+-----------+---------------+---------------+---------------+----------+------
CP sup-eth1
Sample Output for the show running-configuration netflow Command
switch# show running-configuration netflow
version 7.3(0)D1(1)
feature netflow
flow timeout active 60
flow exporter exp1
destination 10.76.80.132 use-vrf management
transport udp 9995
source mgmt0
version 9
SrcAddr
010.014.014.002 010.014.014.001 001:00000:00000 0000000021 ......
template data timeout 5
option sampler-table timeout 8
Verification Examples for NetFlow CoPP Interface Support
DstAddr L4 Info
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
PktCnt TCP Fl
389