Default Settings For Smart Call Home - Cisco Nexus 7000 Series Configuration Manual

Configuring Smart Call Home
• Currently CoPP does not protect packets for Smart Call Home using HTTP/HTTPS or SMTP method
• A system configured for Smart Call Home (SCH) feature where connectivity may fail during reporting
• A syslog should be printed if inband is used for SCH where non-standard destination ports are used
• In a mixed fabric environment with CFS enabled, Cisco devices running Cisco NX-OS Release 5.x can

Default Settings for Smart Call Home

This table lists the default settings for Smart Call Home parameters.
Table 15: Default Smart Call Home Parameters
Parameters
Destination message size for a message sent in full
text format
Destination message size for a message sent in XML
format
Destination message size for a message sent in short
text format
SMTP server port number if no port is specified
SMTP server priority if no priority is specified
Alert group association with profile
Format type
Smart Call Home message level
when connectivity is required inband. Return traffic for these services is subject to class-default CoPP
class and leads to little to no connectivity.
if an explicit class for either the HTTPS method or the SMTP method is not defined in control-plane
policing and there is continual violations in the CoPP class-default class. This issue is only seen when
the configured destination from SCH is known inband.
warning the user to add these ports. Consideration should also be made with a syslog warning when
using either a HTTP or HTTPS proxy server on a non-administrative port to allow reachability to Cisco's
web servers.
distribute 5.x configurations (multiple SMTP server support, HTTP VRF support, and HTTP proxy
support) to other 5.x devices in the fabric over CFS. However, if an existing device upgrades to 5.x,
these new configurations are not distributed to that device because a CFS merge is not triggered upon
an upgrade. Therefore, we recommend applying the new configurations only when all the devices in the
fabric support them or performing an empty commit from an existing 5.x device (not the newly upgraded
device) that has the new configurations.
Default
2,500,000
2,500,000
4000
25
50
All for full-text-destination and short-text-destination
profiles. The cisco-tac alert group for the CiscoTAC-1
destination profile.
XML
0 (zero)
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
Default Settings for Smart Call Home
115