Chapter - Cisco Nexus 7000 Series Configuration Manual

New and Changed Information
Feature
NTP
NTP
NTP
NTP
NTP
SNMP
SNMP
SPAN
SPAN
SPAN
SPAN
SPAN
XMLIN
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
4
Description
Introduced the ntp access-group
match-all command to cause the access
group options to be scanned in order,
from least restrictive to most restrictive.
Introduced the no ntp passive command
to prevent NTP from forming
associations.
Added the ability to configure NTP
broadcast and multicast servers and
multicast clients on an interface.
Added the ability to enable or disable
NTP on an interface.
NTP access group options are now
scanned in order from least restrictive
to most restrictive.
Added support for AAA exclusive
behavior in SNMPv3 servers to
authenticate users based on location.
Added the ability to apply both IPv4 and
IPv6 ACLs to the same SNMPv3 user
or SNMPv3 community.
Added NAM support for SPAN data
sources.
Added support for FEX ports as a SPAN
source in Tx direction only on F2e
Series modules.
Added support for extended SPAN
Added support for rule-based SPAN
Added support for exception SPAN.
Introduced the XMLIN tool to enable
you to convert CLI commands to the
Network Configuration (NETCONF)
protocol.
New and Changed Information
Changed in Where Documented
Release
6.2(2) Chapter 4, "Configuring
NTP"
6.2(2) Chapter 4, "Configuring
NTP"
6.2(2) Chapter 4, "Configuring
NTP"
6.2(2) Chapter 4, "Configuring
NTP"
6.2(2) Chapter 4, "Configuring
NTP"
6.2(2)

Chapter 12,

"Configuring SNMP"
6.2(2) Chapter 12,
"Configuring SNMP"
6.2(2) Chapter 17,
"Configuring SPAN"
6.2(2) Chapter 17,
"Configuring SPAN"
6.2(2) Chapter 17,
"Configuring SPAN"
6.2(2) Chapter 17,
"Configuring SPAN"
6.2(2) Chapter 17,
"Configuring SPAN"
6.2(2) Chapter 25, "Converting
CLI Commands to
Network Configuration
Format"