Configuration Example For Session Manager; Additional References; Related Documents - Cisco Nexus 7000 Series Configuration Manual

Configuration Example for Session Manager

Command
show configuration session [name]
show configuration session status [name]
show configuration session summary
Configuration Example for Session Manager
This example shows how to create and commit an ACL configuration using Session Manager:
switch# configure session ACL_tcp_in
Config Session started, Session ID is 1
Enter configuration commands, one per line. End with CNTL/Z.
switch(config-s)# ip access-list ACL1
switch(config-s-acl)# permit tcp any any
switch(config)# interface e 7/1
switch(config-if)# ip access-group ACL1 in
switch(config-if)# exit
switch(config)# exit
switch# config session ACL_tcp_in
Config Session started, Session ID is 1
Enter configuration commands, one per line. End with CNTL/Z.
switch(config-s)# verify
Verification Successful
switch(config-s)# commit
Commit Successful
switch#

Additional References

Related Documents

Related Topic
Session Manager CLI commands
VDCs
Configuration files
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
160
Configuring Session Manager
Purpose
Displays the contents of the configuration session.
Displays the status of the configuration session.
Displays a summary of all the configuration sessions.
Document Title
Cisco Nexus 7000 Series NX-OS System Management
Command Reference
Cisco Nexus 7000 Series NX-OS Virtual Device
Context Configuration Guide
Cisco Nexus 7000 Series NX-OS Fundamentals
Configuration Guide