Smart Call Home Message Levels - Cisco Nexus 7000 Series Configuration Manual

Configuring Smart Call Home
Alert Group
System
Test
Smart Call Home maps the syslog severity level to the corresponding Smart Call Home severity level for
syslog port group messages.
You can customize predefined alert groups to execute additional CLI show commands when specific events
occur and send that show output with the Smart Call Home message.
You can add show commands only to full text and XML destination profiles. Short text destination profiles
do not support additional show commands because they only allow 128 bytes of text.

Smart Call Home Message Levels

Smart Call Home allows you to filter messages based on their level of urgency. You can associate each
predefined or user-defined destination profile with a Smart Call Home threshold from 0 (least urgent) to 9
(most urgent). The default is 0 (all messages are sent).
Syslog severity levels are mapped to the Smart Call Home message level.
Note Smart Call Home does not change the syslog message level in the message text.
The following table lists each Smart Call Home message level keyword and the corresponding syslog level
for the syslog port alert group.
Table 14: Severity and Syslog Level Mapping
Smart Call Home Level
9
Description
Events generated by failure of a
software system that is critical to
unit operation.
User-generated test message.
Keyword Syslog Level
Catastrophic N/A
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
Smart Call Home Message Levels
Executed Commands
show diagnostic result module all
detail
show hardware
show logging last 200
show module
show sprom all
show tech-support ethpm
show tech-support gold
show tech-support ha
show tech-support platform
show module
show version
Description
Network-wide
catastrophic failure.
111