Licensing Requirements For Xmlin - Cisco Nexus 7000 Series Configuration Manual

Licensing Requirements for XMLIN

The XMLIN tool converts show, EXEC, and configuration commands to corresponding NETCONF <get>,
<exec-command>, and <edit-config> requests. You can enter multiple configuration commands into a single
NETCONF <edit-config> instance.
The XMLIN tool also converts the output of show commands to XML format.
Licensing Requirements for XMLIN
Table 44: XMLIN Licensing Requirements
Product
Cisco NX-OS
Installing and Using the XMLIN Tool
You can install the XMLIN tool and then use it to convert configuration commands to NETCONF format.
Before You Begin
Although the XMLIN tool is usually capable of generating NETCONF instances of commands even if the
corresponding feature sets or the required hardware capabilities are not available on the device, you might
have to install some feature sets before entering the xmlin command.
Procedure
Step 1
Step 2
Step 3
Step 4
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
402
Command or Action
switch# xmlin
switch(xmlin)# configure terminal
Configuration commands
switch(config)(xmlin)# end
Converting CLI Commands to Network Configuration Format
License Requirement
XMLIN requires no license. Any feature not included
in a license package is bundled with the Cisco NX-OS
system images and is provided at no extra charge to
you. For a complete explanation of the Cisco NX-OS
licensing scheme, see the Cisco NX-OS Licensing
Guide.
Purpose
Enters global configuration mode.
Converts configuration commands to NETCONF
format.
(Optional)
Generates the corresponding <edit-config> request.
Note You must enter the end command to finish
the current XML configuration before you
generate an XML instance for a show
command.