Configuring Periodic Inventory Notifications - Cisco Nexus 7000 Series Configuration Manual

Configuring Smart Call Home
Step 6
Step 7
What to Do Next
Optionally configure your device to periodically send inventory notifications.

Configuring Periodic Inventory Notifications

You can configure the device to periodically send a message with an inventory of all software services currently
enabled and running on the device along with hardware inventory information. The device generates two
Smart Call Home notifications: periodic configuration messages and periodic inventory messages.
Procedure
Step 1
Step 2
Step 3
Step 4
Command or Action
show callhome transport
Example:
switch(config-callhome)# show
callhome transport
copy running-config startup-config
Example:
switch(config)# copy running-config
startup-config
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
callhome
Example:
switch(config)# callhome
switch(config-callhome)#
periodic-inventory notification [interval
days] [timeofday time]
Example:
switch(config-callhome)#
periodic-inventory notification
interval 20
commit
Example:
switch(config-callhome)# commit
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
Configuring Periodic Inventory Notifications
Purpose
(Optional)
Displays the transport-related configuration for Smart
Call Home.
(Optional)
Copies the running configuration to the startup
configuration.
Purpose
Enters global configuration mode.
Enters Smart Call Home configuration mode.
Configures periodic inventory messages. The
interval range is from 1 to 30 days, and the
default is 7 days. The time argument is in
HH:MM format. It defines at what time of the
day every X days an update is sent (where X is
the update interval).
Commits the Smart Call Home configuration
commands.
127