Configuring Periodic Inventory Notifications - Cisco Nexus 5000 Series Configuration Manual

Configuring Periodic Inventory Notifications

Step 4
Step 5
Step 6
Step 7
This example shows how to configure the e-mail options for Smart Call Home messages:
switch# configuration terminal
switch(config)# callhome
switch(config-callhome)# transport email smtp-server 192.0.2.10 use-vrf Red
switch(config-callhome)# transport email from person@example.com
switch(config-callhome)# transport email reply-to person@example.com
switch(config-callhome)#
What to Do Next
Configure periodic inventory notifications.
Configuring Periodic Inventory Notifications
You can configure the switch to periodically send a message with an inventory of all software services currently
enabled and running on the device with hardware inventory information. The switch generates two Smart Call
Home notifications; periodic configuration messages: periodic inventory messages.
Procedure
Step 1
Step 2
Step 3
Cisco Nexus 5000 Series NX-OS System Management Configuration Guide, Release 5.2(1)N1(1)
126
Command or Action
switch(config-callhome)# transport
email from email-address
switch(config-callhome)# transport
email reply-to email-address
switch# show callhome
transport-email
switch(config)# copy running-config
startup-config
Command or Action
switch# configure terminal
switch(config)# callhome
switch(config-callhome)#
periodic-inventory notification
[interval days] [timeofday time]
Configuring Smart Call Home
Purpose
(Optional)
Configures the e-mail from field for Smart Call Home
messages.
(Optional)
Configures the e-mail reply-to field for Smart Call
Home messages.
(Optional)
Displays information about the e-mail configuration
for Smart Call Home.
(Optional)
Saves the change persistently through reboots and
restarts by copying the running configuration to the
startup configuration.
Purpose
Enters global configuration mode.
Enters Smart Call Home configuration mode.
Configures periodic inventory messages.
The interval days range is from 1 to 30 days.
The default is 7 days.
The timeofday time is in HH:MM format.