Cleaning; Exterior Painted Surfaces - Beechcraft Baron G58 Pilot Operating Handbook

Model G58

CLEANING

EXTERIOR PAINTED SURFACES

Polyester urethane finishes undergo a cur-
ing process for a period of 30 days after
application. Wash uncured painted sur-
faces with a mild non-detergent soap (MILD
detergents can be used on urethane fin-
ishes) and cold or lukewarm water only.
Use soft cloths, keeping them free of dirt
and grime. Any rubbing of the surface
should be done gently and held to a mini-
mum to avoid damaging the paint film.
Rinse thoroughly with clear water. Stubborn
oil or soot deposits may be removed with
automotive tar removers.
Prior to cleaning, cover the wheels, making certain the brake
discs are covered. Attach the pitot covers securely, and plug or
mask off all other openings. Be particularly careful to mask off
all static air buttons before washing or waxing. Use special
care to avoid removing lubricant from lubricated areas.
Hand washing may be accomplished by flushing away loose
dirt with clean water, then washing with a mild soap and water,
using soft cleaning cloths or a chamois. Avoid harsh, abrasive,
or alkaline soaps or detergents which could cause corrosion or
scratches. Thorough clear-water rinsing prevents buildup of
cleaning agent residue, which can dull the paint's appearance.
To remove oily residue or exhaust soot, use a cloth dampened
with an automotive tar remover. Wax or polish the affected
area if necessary.
April, 2008
Handling, Serv & Maint
Section 8
8-27