Beechcraft Baron G58 Pilot Operating Handbook page 351

Model G58
When the FLOOD LIGHTS switch is turned on, the INST
FLOOD rheostat may be used to adjust the intensity of the
LED flood lights located on the underside of the glareshield.
When the PANEL LIGHTS switch is turned on the other three
rheostats may be used to control the illumination of the follow-
ing items
FLIGHT INST rheostat - Adjusts the lighting intensity of the
PFD and MFD and the electro luminescent panels associated
with the PFD, MFD, audio panel and clock light.
STANDBY INST rheostat - Adjusts the lighting intensity of the
following items:
Rudder Trim Post Light
Elevator Trim Post Light
Aileron Trim Post Light
Cowl Flaps Post Light
Prop Deice Ammeter
Standby Airspeed Indicator
Standby Altimeter
Standby Attitude Indicator
SUBPANEL LIGHTING rheostat - Adjusts the lighting intensity
of the electroluminescent subpanels and circuit breaker pan-
els.
The map, compass and OAT indicator lights are controlled by
a push-on, push-off switch located on the pilot's control wheel.
Cabin reading lights are located above each seat and are
operated by a push-on, push-off switch adjacent to each light.
The three cabin reading lights on the right side of the ceiling
are wired to operate as courtesy lights. A step light located
above the step on the right fuselage and these courtesy lights
will illuminate any time the utility door or cabin door is opened.
To limit battery drain, the step light and courtesy lights are con-
nected to a timer which will extinguish the lights approximately
May, 2015
Section 7
Systems Description
7-51