Beechcraft Baron G58 Pilot Operating Handbook page 208

Section 4
Normal Procedures
6. Maximum and minimum VS references are 1500 fpm
R/C and -3000 fpm R/S.
The VS pointer will only indicate a maxi-
mum of -2000 FPM; however, the digits in
the pointer will continue to indicate the ver-
tical speed up to -3000 FPM.
7. Upon Reaching the Preset Altitude, the green [VS],
[XXXX
FPM
[ALT] and [XXXXX
10 seconds and then become steady.
Use of the Flight Level Change Mode [FLC]
1. ALT Knob . . . . .SET DESIRED LEVEL-OFF ALTITUDE
a. Preset Altitude is displayed in window above the
altimeter display.
If the Flight Director is in Altitude Hold
(green [ALT XXXXX
AFCS status bar), the desired altitude must
be set either above or below the Altitude
Hold value for the FLC mode to function.
2. FLC Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PRESS
a. Green [FLC] and green current airspeed [XXX
played in AFCS status bar.
b. Current airspeed displayed in window above the air-
speed display.
c. Cyan airspeed reference bug displayed on right side
of the airspeed display.
d. White [ALT] Displayed in AFCS Status Bar.
4-40
NOTE
], and white [ALT] will be replaced by a green
], and the green [ALT] will flash for
FT
NOTE
] displayed in the
FT
Model G58
] dis-
KT
June, 2011