Beechcraft Baron G58 Pilot Operating Handbook page 203

Model G58
4. HDG Key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PRESS
5. NAV Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PRESS
If CDI Deviation is > 1Dot:
a. [GPS], [VOR], [LOC], or [BC] . . . . . . . . . DISPLAYED
When CDI Deviation is
b. [GPS], [VOR], [LOC], or [BC] . . . . . . . . . DISPLAYED
Use of Altitude Preselect
1. ALT Knob . . . . ROTATE TO SET DESIRED ALTITUDE
2. PIT, VS, or FLC Mode . . . . . . . . . SET TO INTERCEPT
a. At 1000 feet from desired altitude, the altitude in the
reference box will change from cyan digits on a black
background to black digits on a cyan background,
and the box will flash for 5 seconds.
b. At 300 feet from the desired altitude, a cyan altitude
reference bug will be visible on the left side of the alti-
tude display opposite the desired altitude.
c. At 200 feet from the desired altitude, the altitude in
reference box returns to cyan digits on a black back-
ground, will flash for 5 seconds, and a tone will
sound.
d. When established on the desired altitude, the altitude
reference bug will be aligned with the indicated alti-
tude. The white [ALT] in the AFCS Status Bar will be
replaced with a green [ALT XXXXX
flash for 10 seconds.
June, 2011

1 Dot:
(Desired altitude displayed in
altitude reference box above
altitude display)
Section 4
Normal Procedures
[HDG] Displayed
IN WHITE
IN GREEN
ALTITUDE
]. The [ALT] will
FT
4-35