Beechcraft Baron G58 Pilot Operating Handbook page 484

air, as it is drawn through the cabin, and distribute it to the
overhead vents.
To restore automatic climate control operation, press the com-
pressor switch button until the adjacent annunciator light is on,
select the desired cabin temperature and press the AUTO but-
ton until the adjacent annunciator light is on.
OAT- OUTSIDE AIR TEMPERATURE
When depressed, the outside air temperature is displayed as
measured by the outside air temperature sensor. The outside
air temperature will be displayed for 5 seconds then return to
the normal mode of interior temperature selection.
The outside temperature display is not to
be considered an indicator for possible
icing conditions. Ice formation can occur at
indicated temperatures above freezing and
in a multitude of conditions. Refer to the
POH/AFM for information regarding flight
into icing conditions.
The Climate Control System can display
OAT. This display is advisory only and may
differ from other OAT indications displayed
in the cockpit.
OFF
When the OFF button is depressed, the entire climate control
system is switched off. In this mode of operation, the heater/
fresh air valve in the nose of the airplane is automatically
closed by the climate control system once the heater cool
down cycle is complete. Note that the automatic closing of the
22 of 24
NOTE
Issued: March, 2017
FAA Approved
P/N 58-590000-0091