Lifestand LSCT Service Manual page 85

LSCT Maintenance manual
Item N° 326617 Revision A Date 25/06/2015 Page 85 of 93
TROUBLESHOOTING :
System log
All the errors are recorded in a log, as to whether they have been resolved or whether they are still active.
The system log stores all the error messages and the number of events. The errors are stored in their
respective modules within the system.
The system log is accessible via the direct programming of the system (On Board Programming, OBP).
Contact Lifestand or your repairer to find out more about OBP.
Activation of the OBP position
• Select «System» in the menu.
• Select «Diagnostics» in the menu.
• The diagnostic screen will be displayed and shows the modules connected as well as the record of the
versions. See illustration below.
• If no error has occurred on a module, the system will show the message «No Entries».
In the opposite case, the system will display a similar screen to that below.