Lifestand LSCT Service Manual page 82

LSCT
Item N° 326617
R-NET TROUBLESHOOTING GUIDE:
Event
The chair doesn't start.
The chair doesn't move
The chair switches off itself
after 20-30 minutes of
inactivity.
The chair stops whilst it is
travelling.
The chair works only at a
reduced speed.
The chair is not recharging
Maintenance manual
Revision A Date 25/06/2015
Possible cause
Batteries have run out.
The electric cable of the
control box has come loose.
The protective fuse is
damaged.
The battery charger is
attached to the chair
The brakes of the motors are
in the «DISENGAGE»
position.
The backrest is tilted too far
The seat tilt is tilted too far.
The energy saving function is
activated.
The electric cable of the
control box has come loose.
The chair take slope and the
angle of the backrest is too
low.
The fuse is damaged
The chair is in standing
position (or has not returned
completely to the sitting
position).
The fuse is damaged.
The cable of the control box
has come loose.
Page 82 of 93
TROUBLESHOOTING :
Solution
Charge the batteries.
Reconnect the cable.
Replace the fuse.
Switch off the charger and
remove the power cable from
the charging socket of the
control box.
Place the brakes of the
motors into the «ENGAGE»
position.
Straighten the backrest.
Straighten up the seat tilt.
Restart the chair by pressing
the control box switch.
Reconnect the cable.
Straighten up the backrest
and/or the seat tilt.
Replace the fuse.
Place the chair in the sitting
position.
Replace the fuse.
Reconnect the cable.