Armrests (2/2) - Lifestand LSCT Service Manual

LSCT
Item N° 326617

ARMRESTS (2/2):

Assembling part B:
1. Insert the armrest tube into the armrest
nut. (See figure 114)
2. Tighten the screw on the armrest tube
(Tightening torque: 3.22N.m). (See figure
114)
Assembling part A:
1. Assemble the various components as
shown opposite. (See figure 115)
2. Insert the Allen key 4 across the disc and
the curved plate. (See figure 116)
3. Tighten the cylinder head screw with
thread lock medium (Tightening torque:
27N.m). (See figure 116)
4. Tighten the axle located in the groove
(Tightening torque: 11.1N.m). (See figure
116)
Assembling part A+B :
1. Position part A, the intermediary plate and
the set with the armrest nut opposite each
other. Insert the axle through these
components and tighten everything with
the washer and the nut (Tightening
torque: 27N.m). (See figure 117)
Maintenance manual
Revision A Date 25/06/2015 Page 46 of 93
Figure 114
Figure 115
Figure 116
B
A
Figure 117
REPAIRS: