Seat Stop - Lifestand LSCT Service Manual

LSCT
Item N° 326617

SEAT STOP:

Dismantling:
1. Tilt the seat backwards.
2. Unscrew the two fastening screws for the
seat stop by holding the seat stop. (See
figure 57)
3. Remove the seat stop from the side. (See
figure 58)
4. If required remove the retaining bracket of
the sensor on the right seat stop and
attach it to the new seat stop.
Assembly:
Assemble in the reverse order.
1. Replace the seat stop (remount the
retaining bracket of the sensor if it has
been removed).
2. Tighten the seat stop (Tightening torque:
11.1N.m).
Maintenance manual
Revision A Date 25/06/2015
View from below
Figure 57
Figure 58
Page 24 of 93
REPAIRS:
Retaining
bracket of
the sensor