Motors (2/2) - Lifestand LSCT Service Manual

LSCT
Item N° 326617

MOTORS (2/2):

Assembly:
Assemble in the reverse order.
1. Position the motor under its support
(warning, ensure there is space for the
cable before attaching the motor).
2. Tighten the 4 screws. (Tightening torque:
27N.m) (See figure 108)
3. Reconnect the motor cable to the Power
Module and attach it (See section
«Electrical circuit diagram» and «Chair
wiring)).*
4. Put back the rear wheel (See section
«Rear wheel»).
5. Put back the back cover (See section
«Back cover»).
Maintenance manual
Revision A Date 25/06/2015 Page 43 of 93
REPAIRS:
Figure 108
: