Front Lights - Lifestand LSCT Service Manual

LSCT
Item N° 326617

FRONT LIGHTS:

1. Place the chair in standing position.
2. Take off the back cover (See section
«Back cover»).
3. Disconnect the front light.
4. Cut the clamping collars which hold the
cable for the front light. (Note the location
of the clamping collars so that you can
rewire the light.)
5. Remove the front light from its support by
unscrewing the screw. (See figure 105)
6. Install the new light by replacing the
screw (Tightening torque: 3.2N.m).
7. Rewire the light (See «Electrical circuit
diagram» and «Chair wiring»).
8. Put back the back cover (See section
«Back cover»).
Maintenance manual
Revision A Date 25/06/2015 Page 40 of 93
REPAIRS:
Figure 105