Lifestand LSCT Service Manual page 10

LSCT
Item N° 326617
ISM AND/OR POWER MODULE:
Dismantling:
1. Remove the back cover (see section
«Back cover»).
2. Remove the underride guard (see section
«Underride guard and antitipper wheels).
3. Unscrew the 4 screws. (See figure 14)
4. Disconnect all the cables connected to
the ISM or the Power Module (noting their
position).
5. Remove the closing plate and unscrew
the ISM and/or the Power Module. (See
figure 15 & 16)
Assembly:
Assemble in the reverse order.
1. Reattach the Power Module and/or the
ISM. (See figure 17 & 18)
2. Reposition the closing plate.
3. Re-tighten the 4 screws (Tightening
torque: 11.1N.m). (See figure 19)
4. Put back the underride guard (Tightening
torque: 27N.m).
5. Reconnect the various connectors on the
power module and/or the ISM (See
section «Electrical circuit diagram» and
«Chair cabling»).
6. Put back the back cover (see section
«Back cover»).
Maintenance manual
Revision A Date 25/06/2015 Page 10 of 93
Figure 14
Figure 16
Figure 17
Figure 19
REPAIRS:
Figure 15
Figure 18