Backrest Straps (2/2) - Lifestand LSCT Service Manual

LSCT
Item N° 326617

BACKREST STRAPS (2/2):

Assembly:
Assemble in the reverse order.
1. Place the new backrest straps into
position.
2. Reposition the backrest onto the chair
3. Attach the backrest by replacing the two
screws in the lower part (Tightening
torque: 27N.m). (See figure 125)
4. Replace the nut cap. (See figure 125)
5. Extend the backrest straps.
6. Replace the backrest cover. (See figure
126)
7. Replace the headrest support and tighten
the indexable handle. (See figure 126)
8. Reposition the armrests. (See section
«Armrests»).
Maintenance manual
Revision A Date 25/06/2015 Page 51 of 93
REPAIRS:
Figure 125
Figure 126