Rear Wheels (2/2) - Lifestand LSCT Service Manual

LSCT
Item N° 326617

REAR WHEELS (2/2):

Assembly:
Assemble in the reverse order.
1. Reassemble the rear wheel and re-tighten
the 5 screws (Tightening torque: 27N.m)
(See figure 29).
2. Attach the wheel onto the hub with the 4
cylindrical head screws. (Tightening
torque: 27N.m) (See figure 30).
3. Replace the plastic cover. (See figure 31)
WARNING !
The tyre pressure recommended for the rear
tyres is between 2.5 and 3 bar. Over-inflation
can cause the tyre to explode. Under-
inflation will lead to stability and handling
problems, as well as premature wear and
tear. It is important to check the tyre pressure
regularly.
Maintenance manual
Revision A Date 25/06/2015 Page 14 of 93
Figure 28
Figure 30
Figure 31
REPAIRS:
Figure 29