Armrests (1/2); Armrests (2/2) - Lifestand LSCT Service Manual

LSCT
Item N° 326617

ARMRESTS (1/2):

Dismantling:
1. Remove the armrests (see section
«Armrest height adjustment» up to step
5).
2. Unscrew the nut and remove the axle, the
armrest nut as well as the intermediary
plate. (See figure 110)
3. Once the axle has been removed, the unit
can be disassembled as shown. (See
figure 110)
Dismantling part A:
1. Insert an Allen key 4 across the disc and
the plate (to prevent the disc from
rotating) and unscrew the screw which is
behind. (See figure 111)
2. Unscrew the axle located on the front part
of the plate. (See figure 111)
3. Once the two screws have been taken
out, the set is decomposed as shown
opposite. (See figure 112)
Dismantling part B:
1. Unscrew the screw. (See figure 113)
2. Remove the armrest set from the armrest
nut. (See figure 113)
3. Refer to section « Armrest depth
adjustment » to dismantle the armrest
tube.
Maintenance manual
Revision A Date 25/06/2015 Page 45 of 93
B
A
Figure 110
Figure 111
Figure 112
Figure 113
REPAIRS: