Front Translation Guiding - Lifestand LSCT Service Manual

LSCT
Item N° 326617
SEAT TILT:

FRONT TRANSLATION GUIDING:

Dismantling:
1. Tilt the seat backwards (to about 35°).
2. Place a wedge under the base. (See
figure 54)
3. Tilt the seat forwards until it is in contact
with the wedge (Do not continue the
movement once the wedge is in contact).
4. Unscrew the nuts. (only one of the two
nuts will unscrew). (See figure 55)
5. Pull out the two safety rings. (See figure
55)
6. Remove the axle (note the location of the
various components).
7. Replace the worn or damaged
components.
Assembly:
Assemble in the reverse order.
1. Insert the axle through the various
components as shown in the view
opposite. (See figure 56)
2. Replace the safety rings. (See figure 56)
3. Re-tighten the nut. (Tightening torque:
27N.m). (See figure 56)
4. Pull out the wedge.
Maintenance manual
Revision A Date 25/06/2015
«Base»
Figure 54
For greater visibility, the wedge
has been hidden in this view
Figure 55
Spacer
Washer
Figure 56
Page 23 of 93
REPAIRS: