Lifestand LSCT Service Manual page 59

LSCT
Item N° 326617
SEAT WIDTH ADJUSTMENT (2/2):
Assembly :
Assemble in the reverse order.
1. Replace the seat plates with those
corresponding to the new width of the
chair and reattach them (Tightening
torque: 11.1N.m). (See figure 141)
2. Reattach the extensions of the upper and
lower backrest cross beams (Tightening
torque: 11.1N.m). (See figure 142)
3. Re-tighten the two screws on headrest /
harness crossbar (if installed on the
wheelchair) (Tightening torque: 11.1N.m).
(See figure 142).
4. Re-tighten the backrest straps.
5. Position the backrest cover. (See section
«Backrest cover» to find the reference
that is compatible with the selected
width»).
6. Place the seat cushion (See section
«Seat cushion» to find the reference that
is compatible with the width and depth of
the chair).
Maintenance manual
Revision A Date 25/06/2015 Page 59 of 93
SETTINGS:
Figure 141
Figure 142