LSCT
Item N° 326617
BACKREST STRAPS (1/2):
Dismantling:
1. Unscrew the indexable handle and
remove the headrest support. (See figure
123)
2. Remove the backrest cover. (See figure
123)
3. Fold down the backrest (See section
«Backrest actuator»), (undo the wiring
only up to the bottom of the backrest).
4. Remove the armrests (see section
«Armrests»)
5. Remove the nut cap and remove the two
screws connecting the backrest to the
seat. (See figure 124)
6. Remove the backrest.
7. Remove the backrest straps (from above
for the straps above the cross beam and
from underneath for those under the
backrest cross beam).
8. Place the new straps into position.
Maintenance manual
Revision A
Date 25/06/2015
Page 50 of 93
REPAIRS:
Figure 123
Figure 124