Front Wheel Bearings (2/2) - Lifestand LSCT Service Manual

LSCT
Item N° 326617

FRONT WHEEL BEARINGS (2/2):

Assembly:
Assemble in the reverse order.
1. Re-tighten the nut (Tightening torque:
148N.m) (See figure 39)
2. Insert the axle + bearing set into the
frame housing (place a bit of grease onto
the bearings and the O-ring to make it
easier to insert into the frame).
3. Place the washer into position then
tighten the 3 countersunk head screws.
(Tightening torque: 3.22N.m). (See figure
40)
4. Reattach the fork + wheel set with the nut
and the washer (Tightening torque:
92N.m). (See figure 41)
Maintenance manual
Revision A Date 25/06/2015 Page 18 of 93
REPAIRS:
Figure 39
Figure 40
Figure 41