Lifestand LSCT Service Manual page 31

LSCT
Item N° 326617
LEGREST ACTUATOR (1/2):
Dismantling:
1. Dismantle the legrest (see section
«Legrest»).
2. Unscrew the flange plate from the strap.
(See figure 74)
3. Remove the strap from the flange plate.
(Make a mark on the strap so that you
can put it back in the same position).
4. Remove the lower nut from the legrest
actuator. (See figure 75)
5. Remove the upper nut from the legrest
actuator and take out the axle. (See
figure 75)
6. Remove the set «legrest actuator ».
7. Unscrew the screws from the upper ring.
(See figure 76)
8. Unscrew the tightening screw from the
lower ring. (See figure 76)
9. Remove the actuator by making it come
across from above.
Maintenance manual
Revision A Date 25/06/2015 Page 31 of 93
REPAIRS:
Figure 74
Figure 75
Figure 76