Shock Absorbers (2/2) - Lifestand LSCT Service Manual

LSCT
Item N° 326617

SHOCK ABSORBERS (2/2):

Assembly:
Assemble in the reverse order.
1. Attach the shock absorber onto the motor
support (Tightening torque: 27N.m). (See
figure 102)
2. Attach the shock absorber onto the frame
(Tightening torque: 27N.m). (See figure
103)
3. Re-install the frame (See section
«Frame»).
4. Put back the back cover (See section
«Back cover»).
5. Procedure for pre-stressing the shock
absorbers depending on the weight of
the user, see the table opposite. (See
figure 104)
Maintenance manual
Revision A Date 25/06/2015 Page 39 of 93
REPAIRS:
Figure 102
Figure 103
Figure 104