Frame (2/2) - Lifestand LSCT Service Manual

LSCT
Item N° 326617

FRAME (2/2):

Assembly:
Assemble in the reverse order.
1. Position the frame in front of its attaching
holes.
2. Pre-tighten the 4 interior screws (only a
few turns of the thread) (See figure 44)
3. Pre-tighten the external screw. (See
figure 45)
4. Finish tightening the 4 interior screws
(Tightening torque: 27N.m). (See figure
44)
5. Finish tightening the external screw
(Tightening torque: 53N.m). (See figure
45)
6. Replace the front light (See section
«Front lights»).
7. Put back the back cover (See section
«Back cover»).
Maintenance manual
Revision A Date 25/06/2015 Page 20 of 93
REPAIRS:
Figure 44
Figure 45