Legrest Compensation Strap - Lifestand LSCT Service Manual

LSCT
Item N° 326617
LEGREST COMPENSATION STRAP ROLLERS:
1. Remove the legest completely.
2. Remove the axle and take out the roller.
(See figure 93)
3. Place the new roller into position and re-
attach the axle.
4. Remove the 6 screws on the clamping
ring. (See figure 94)
5. Slide the ring (upwards or downwards
depending on its position). (See figure
95)
6. Take out the roller. (See figure 95)
7. Place the new roller into position.
8. Reposition the ring.
9. Re-tighten the screws.
Maintenance manual
Revision A Date 25/06/2015 Page 36 of 93
REPAIRS:
Figure 93
Figure 94
Figure 95