Lifestand LSCT Service Manual page 35

LSCT
Item N° 326617
LEGREST COMPENSATION STRAP:
Compensations 160mm and 195mm:
- Top attachment of the strap:
Unscrew the two screws, move the strap
as shown in the diagram opposite, re-
tighten the screws. (See figure 87)
-Lower attachment of the strap:
Unscrew the two screws, move the buckle
of the strap as shown in the diagram
opposite, re-tighten the screws. (See
figure 88)
NOTE:
See section «Compensation adjustment of
the legrest» for the trajectory of the strap
and see section «Strap tension legrest
compensation» for the tension of the strap.
Compensations 77mm and 96mm:
- Top attachment of the strap:
Remove the two fastening screws of the
plate, move the strap in the plate as
shown in the picture opposite.
Reposition the plate and tighten the
screws to grip the strap. (See figure 89)
- Lower attachment of the strap :
Remove the 6 screws from the clamping
ring, slide the ring (upwards or
downwards depending on its position).
Move the buckle of the strap around the
axle of the ring. (See figure 90, 91, 92)
Replace the ring in its position and re-
tighten.
NOTE:
See section «Compensation adjustment of
the legrest» for the trajectory of the strap
and see section «Strap tension legrest
compensation» for the tension of the strap.
Maintenance manual
Revision A Date 25/06/2015 Page 35 of 93
Figure 87
Figure 88
Figure 89
Figure 90
Figure 92
REPAIRS:
Figure 91