Rear Lights - Lifestand LSCT Service Manual

LSCT
Item N° 326617

REAR LIGHTS:

1. Place the chair in standing position.
2. Take off the back cover (See section
«Back cover»).
3. Disconnect the lights and the indicators.
4. Carefully remove the damaged
components. (Using a flat screwdriver).
5. Install the new lights and/or indicators
(Warning: position the wording «TOP»
shown on the lights and the indicators
towards the top).
6. Reconnect the lights and the indicators.
7. Put back the back cover (See section
«Back cover»).
Maintenance manual
Revision A Date 25/06/2015 Page 41 of 93
REPAIRS:
Figure 106