Lifestand LSCT Service Manual page 34

LSCT
Item N° 326617
LEGREST GUIDE RAIL (2/2):
Assembly:
Assemble in the reverse order.
1. Position the guide rail in front of the holes
in the supporting part and tighten the 5
countersunk head screws. (Adjust the
tightening of the screws so that the pad
slides freely). (See figure 83)
2. Screw the pad onto the rail (Tightening
torque: 11.1N.m). (See figure 84)
3. Insert the sliding part and attach it to the
pad with the 4 countersunk head screws
(Tightening torque: 6.4N.m). (See figure
85)
4. Attach the fastening plate strap onto the
sliding part (Tightening torque: 6.4N.m).
(See figure 86)
5. Attach the calfrest support onto the sliding
part (Tightening torque: 11.1N.m). (See
figure 86)
6. Attach the part with the ball bearings onto
the sliding part (Tightening torque:
3.22N.m). (See figure 86)
Maintenance manual
Revision A Date 25/06/2015 Page 34 of 93
REPAIRS:
Figure 83
Figure 84
Figure 85
Figure 86