Shock Absorbers (1/2) - Lifestand LSCT Service Manual

LSCT
Item N° 326617

SHOCK ABSORBERS (1/2):

Dismantling:
1. Place the chair on a wedge (The wheels
must not be in contact with the ground).
2. Place the chair in standing position.
3. Take off the back cover (See section
«Back cover»).
4. Dismantle the frame (see section
«Frame»).
5. Dismantle the upper fastening of the
shock absorber. (See figure 100)
6. Dismantle the lower fastening of the
shock absorber (Be careful, when
removing the axle, hold the motor so that
it doesn't fall). (See figure 101)
7. Replace the shock absorber.
Maintenance manual
Revision A Date 25/06/2015 Page 38 of 93
REPAIRS:
Figure 100
Figure 101