Front Wheels (1/2) - Lifestand LSCT Service Manual

LSCT
Item N° 326617

FRONT WHEELS (1/2):

Dismantling:
1. Place the chair on wedges so that the
front wheels do not touch the ground.
2. Remove the nut and take off the wheel.
(See figure 32)
3. To change the tyre or inner tube, remove
the 5 screws then separate the interior
section from the outer section of the rim.
(See figure 33)
WARNING !
The tyre pressure recommended for the front
tyres is between 2.5 and 3 bar. Over-inflation
can cause the tyre to explode and premature
wear and tear. Under-inflation will lead to
stability and handling problems, as well as
premature wear and tear. It is important to
check the tyre pressure regularly.
Maintenance manual
Revision A Date 25/06/2015 Page 15 of 93
REPAIRS:
Figure 32
Figure 33